Wefoka Dash Cam Loop Recording Explained: How It Works and Settings

If you own a Wefoka F10pro dash cam for your Ford Bronco, you've probably noticed it records continuously without ever asking you to delete files. That's loop recording in action—a feature that ensures you always have the most recent footage while older clips are automatically overwritten. But how does it really work? How does the G‑sensor interact with it? And can you adjust the settings? This guide breaks down everything you need to know about loop recording on your Wefoka dash cam.

🎯 Why Loop Recording Is Essential for Dash Cams

Without loop recording, you'd have to manually delete files or swap SD cards every few hours. That's impractical and unsafe. Loop recording automates storage management so you can focus on driving. As one Bronco owner noted:

🔧 How Wefoka F10pro Loop Recording Works

The Wefoka F10pro records both front (4K) and rear (1080p) video simultaneously. It splits the footage into small files—by default, each file is typically 3 minutes long, but you can change this in the app. These files are saved to the included 128GB microSD card (or your own up to 256GB). When the card reaches capacity, the camera looks for the oldest unlocked files and overwrites them with new recordings.

Key point: Only files that are not protected by the G‑sensor or manually locked are eligible for overwriting. This ensures that critical evidence of a collision is never accidentally deleted.

🛡️ G‑Sensor: The Protector of Crucial Clips

The built‑in G‑sensor detects sudden impacts (like a collision or hard braking). When triggered, it automatically locks the current video file, moving it to a protected folder. These locked files are immune to loop overwriting. They remain on the card until you manually delete them or format the card.

You can also manually lock any video via the app if you see something noteworthy—just tap the lock icon. This gives you full control over what stays on your card.

⚙️ Adjusting Loop Recording Settings

The Wefoka app lets you customize loop recording to suit your preferences. Here's how to access and change the settings:

1. Connect to the camera's WiFi and open the Wefoka app.
2. Tap the gear icon (Settings) in the app.
3. Look for “Loop Recording” or “Video Clip Length”. You'll typically see options like:
• 1 minute – Creates many small files; useful if you frequently review and share short clips.
• 3 minutes – The default; a good balance between file size and manageability.
• 5 minutes – Fewer files, but each file is larger; good if you prefer longer continuous segments.
4. Select your preferred length and save. The camera will apply the new setting immediately.

Note: Regardless of the clip length, loop recording always works seamlessly—the camera will overwrite the oldest clips of the same length.

💾 SD Card and Loop Recording: What You Need to Know

The Wefoka F10pro supports cards up to 256GB. The included 128GB card, when recording both front and rear, holds approximately 7.5 hours of footage before loop recording begins. That means you always have the last 7.5 hours of driving available. When you drive more, the oldest hour is overwritten, and so on.

If you use a 256GB card, you'll have roughly 15 hours of rolling history. This is great for long road trips where you might not want to lose early footage before the trip ends.

🔒 Locked Files and Card Capacity

Locked files (from G‑sensor or manual lock) are stored separately and do count against the card's total capacity. If you accumulate many locked files, they will eventually fill the card, and the camera will stop recording new footage. That's why it's important to periodically review locked files and offload those you want to keep, then delete them from the card. Formatting the card (after backing up) is the quickest way to reset it.

❓ Common Loop Recording Questions

Will I lose footage of an accident if it happens right before the card loops?

No—the G‑sensor will trigger and lock the file containing the impact. Even if the card is nearly full, the locked file is preserved. Additionally, loop recording only overwrites the oldest unlocked files, so a recent accident file won't be overwritten until long after you've had a chance to save it.

Can I recover overwritten files?

Once a file is overwritten, it's generally unrecoverable. However, because loop recording only overwrites the oldest files, you have a window of time (hours or days) to save important clips before they're gone. Always download and save any critical footage as soon as possible.

Does loop recording work differently when parking mode is off?

The Wefoka F10pro does not have parking mode, so loop recording only operates while the engine is running. This simplicity ensures the camera never drains your battery.

How do I know which files are locked?

In the Wefoka app, locked files are usually marked with a lock icon or stored in a separate “Event” folder. On a computer, they may be in a folder named “RO” or “Locked”.

🗣️ Real Owners on Loop Recording

💡 Best Practices for Loop Recording

• Format your SD card regularly (every 2‑4 weeks) to keep the file system healthy. Back up any locked files first.
• Adjust G‑sensor sensitivity if you get too many false locks (e.g., on rough roads). Set it to Low for off‑roading.
• Check your locked files periodically and offload those you want to keep. Don't let them pile up.
• Choose a clip length that suits your reviewing habits. Shorter clips are easier to share; longer clips reduce file count.
• If you upgrade to a 256GB card, ensure it's a high‑endurance card (U3/V30) and format it in the camera first.

✅ Mastering Loop Recording on Your Wefoka

Loop recording is a simple yet powerful feature that makes your Wefoka F10pro dash cam a set‑and‑forget safety tool. By understanding how it interacts with the G‑sensor and how to adjust the settings, you can ensure you always have the evidence you need—without ever worrying about storage. As one Bronco owner summed up: “This dash cam has allowed my family to feel safer on the road and is hands‑down one of the best investments we've made.” With loop recording working quietly in the background, you can focus on the drive.

❓ Loop Recording FAQ

Q: Can I turn off loop recording?
A: No, loop recording is essential for continuous operation. Without it, the card would fill up quickly and stop recording.

Q: How long does the 128GB card last before looping?
A: Approximately 7.5 hours of continuous dual‑cam recording. After that, the oldest clips begin to be overwritten.

Q: Does the G‑sensor lock the entire video file or just the moment of impact?
A: It locks the entire file (the segment you set, e.g., 3 minutes) that contains the impact. This gives you context before and after the event.

Q: Can I recover a file that was accidentally overwritten?
A: Once overwritten, recovery is extremely unlikely. Always lock important files immediately.

© 2025 – Independent guide based on product specs and real owner experiences.